An experimental investigation of the effects of thawed soil depth on rill flow velocity

Water flow velocity is an important hydraulic variable in hydrological and soil erosion models, and is greatly affected by freezing and thawing of the surface soil layer in cold high-altitude regions. The accurate measurement of rill flow velocity when impacted by the thawing process is critical to simulate runoff and sediment transport processes. In this study, an electrolyte tracer modelling method was used to measure rill flow velocity along a meadow soil slope at different thaw depths under simulated rainfall. Rill flow velocity was measured using four thawed soil depths (0, 1, 2 and 10 cm), four slope gradients (5°, 10°, 15° and 20°) and four rainfall intensities (30, 60, 90 and 120 mm·h⁻¹). The results showed that the increase in thawed soil depth caused a decrease in rill flow velocity, whereby the rate of this decrease was also diminishing. Whilst the rill flow velocity was positively correlated with slope gradient and rainfall intensity, the response of rill flow velocity to these influencing factors varied with thawed soil depth. The mechanism by which thawed soil depth influenced rill flow velocity was attributed to the consumption of runoff energy, slope surface roughness, and the headcut effect. Rill flow velocity was modelled by thawed soil depth, slope gradient and rainfall intensity using an empirical function. This function predicted values that were in good agreement with the measured data. These results provide the foundation for a better understanding of the effect of thawed soil depth on slope hydrology, erosion and the parameterization scheme for hydrological and soil erosion models.     

黄土洞室掘进深度与围岩位移变化规律研究

应用PLAXIS 2D/3D有限元分析软件,对某黄土洞室进行了二维、三维分步掘进、三维一次掘进等工况的弹塑性有限元分析,研究分析了不同工况下洞室围岩位移的变化规律,并对掌子面的空间效应进行了分析。分析结果表明,二维与三维分步计算的最终位移基本一致,可以用二维的计算结果来估算洞室开挖的最终位移。三维分步掘进的分析表明,不同埋深的洞室其位移比的变化规律基本一致,当L/B<1时(L为掘进深度,B为洞室跨度),位移比呈线性增加;当L/B>1时,位移比呈非线性增加;当L/B>3时,其最大位移接近最终位移。掌子面的空间效应分析表明,在掌子面处的位移约为最终位移的1/3,距掌子面0.5倍跨度处的位移约为最终位移的2/3,距掌子面2.5倍跨度处的位移基本达到了最终位移。     

南海北部西沙海槽沉积物管状黄铁矿特征及其形成机理*

南海北部西沙海槽S1站位的岩心柱沉积物中广泛发育自生矿物黄铁矿,其形态以管状为主,且具有内部中空的圈层结构。使用扫描电镜、电子探针、LA-ICP-MS、SIMS等测试方法研究了管状黄铁矿的形态及圈层结构,结果显示: (1)管状黄铁矿发育内部中空的圈层结构,其中内圈层(I_py)由莓球状黄铁矿呈五角十二面体紧密堆积组成,外圈层(O_py)由晶形较好晶粒较大的八面体黄铁矿组成,并混有沉积碎屑及钙质生物壳体;(2)内圈层和外圈层分别呈现出贫S富Fe和富S贫Fe的特征,其成因是甲烷渗漏造成的局部还原环境使得As进入黄铁矿中导致晶格空缺或被扭曲,从而促进Ni、Co、Cu、Zn、Pb等微量元素的掺入;(3)内圈层、外圈层发生了明显的硫同位素分馏现象,内圈层中 δ³⁴S 平均为-37.8‰,外圈层中 δ³⁴S 平均为-29.3‰。研究认为,管状黄铁矿作为曾经甲烷渗漏的通道,其生长机制可分为3个阶段: (1)气水通道形成阶段: 向上运移的甲烷流体在沉积物孔隙中逐渐形成气水通道;(2)外圈层形成阶段: 当向上运移的甲烷与硫酸盐发生甲烷厌氧氧化时,逐渐形成晶体较大、晶形较好的八面体黄铁矿外圈层;(3)内圈层形成阶段: 随着甲烷浓度逐渐降低,在气水通道中的微生物作用下,剩余甲烷与向下运移的硫酸盐继续反应形成莓球状黄铁矿内圈层。因此,南海北部的泥岩中大量发育的管状黄铁矿常常与地层中甲烷水合物的存在有关。     

内蒙古碾子沟钼矿床成矿流体来源、演化及成矿机理

内蒙古自治区碾子沟钼矿床地处华北地台北缘西拉木伦钼成矿带西段，为一典型的中型石英脉型钼矿床。该钼矿床矿脉（体）主要产于燕山早期二长花岗岩-钾长花岗岩内NNW、NW向断裂构造体系之中，成矿作用过程经历了黄铁矿±辉钼矿＋石英（Ⅰ）、辉钼矿＋黄铁矿±黄铜矿＋石英（Ⅱ）、黄铜矿＋黄铁矿±闪锌矿＋石英（Ⅲ）及石英±方解石（Ⅳ）4个阶段。系统的流体包裹体岩相学、包裹体组分析、包裹体显微测温研究表明，矿床初始成矿流体为高温、中低盐度（490~550℃，盐度（w（NaC1））2%~10%，50~62 MPa）均匀的NaCl-H₂O体系热液，δ¹⁸O_H2O-SMOW（2.21‰）及δD_H2O-SMOW（-68.9‰）表明其主要来源于岩浆热液；成矿流体上升并不断汇聚于容矿断裂空间，伴随温度、压力降低（380~460℃，26~40 MPa→360~420℃，25~30 MPa）而进入两相不混溶区，流体开始发生沸腾→强烈沸腾作用，导致成矿元素Mo大量沉淀富集成矿，成矿晚期残余流体与大气降水混合（δ¹⁸O_H2O-SMOW为-2.41‰~2.51‰，δD_H2O-SMOW为-110.1‰~-105.5‰），矿床属燕山早期中高温岩浆热液型钼矿床。     

四川盆地广安地区中二叠统栖霞组岩石特征与沉积环境

四川盆地中二叠统栖霞组勘探发现系列油气，资源潜力巨大。但广安地区中二叠统栖霞组的岩石学特征及沉积环境研究薄弱。在野外地质调查的基础上，结合室内岩石学、岩相学等综合分析，对广安地区栖霞组碳酸盐岩岩石特征、沉积相类型及其古地理展布特征进行了系统研究。结果表明：广安地区栖霞组主要发育亮晶颗粒灰岩、亮晶生物碎屑灰岩、微晶生物碎屑灰岩、微晶颗粒灰岩、生物碎屑微晶灰岩、含生物碎屑微晶灰岩和泥晶灰岩7种岩石类型；碳酸盐岩颗粒主要以生物碎屑为主，部分层位发育球粒；古生物化石以三叶虫、腕足和有孔虫为主，同时可见棘皮类和藻类；栖霞组沉积期主要为碳酸盐岩台地沉积环境，其中栖霞组晚期（栖二段）台缘滩和台内滩较为发育，为该区油气成藏提供了有利条件。     

Concurrent Determination of U‐Pb Age and REE Mass Fractions of Zircon by High Mass Resolution SIMS

A combined geochronological and geochemical investigation for the same domain of zircon provides valuable information on timing and genesis, particularly in the case of multi‐growth metamorphic zircon. A high spatial resolution concurrent analytical method for zircon U‐Pb age and rare earth element content was successfully achieved in this study, using a multi‐collector secondary ion mass spectrometer (SIMS) at a ~ 8 μm diameter scale. Special instrument parameters were employed, including a high mass resolution of approximately 15000 applied to replace the previous energy filter method, and a dynamic multi‐collector mode used to reduce the measurement time to 18 min per analysis. Six zircon reference materials yielded precise and accurate ²⁰⁶Pb/²³⁸U ages, which are comparable to those obtained by the ordinary mono‐collector method, but with 2–3 times higher spatial resolution. All zircon grains measured in this study showed enriched heavy‐REE (HREE) contents consistent with previously reported values determined by LA and solution ICP‐MS methods. The light‐REE (LREE) mass fractions measured using both SIMS and LA‐ICP‐MS methods in this study, although with quite different volume, show consistent results within uncertainties.     

Variation in the vertical zonality of erodibility and critical shear stress of rill erosion in China's Hengduan Mountains

Soil erodibility is an essential parameter used in soil erosion prediction. This study selected the Liangshan town watershed to quantify variation in the vertical zonality of rill erodibility (k_r) in China's ecologically fragile Hengduan Mountains. Soil types comprised of yellow–brown (soil A), purple (soil B), and dry-red (soil C) in a descending order of occurrence from the summit to the valley, which roughly corresponds to the vertical climate zone (i.e. cool-high mountain, warm-low mountain, and dry-hot valley sections) of the study area. With elevation, vertical soil zonality varied in both soil organic matter (SOM) content and soil particle-size fractions. A series of rill erosion-based scour experiments were conducted, using water discharge rates of 100, 200, 300, 400, 500, and 600 mL min^-1. Additionally, detachment rates (Dr) were measured under three hydrological conditions (the drainage, saturation, and seepage treatments). Results show that both Dr and flow shear stress (Ʈ) values increased as discharge increased. As elevation increased, the k_r values decreased, while the vertical zonality of critical shear stress (Ʈ_c) values showed no obvious variation. The highest k_r values were observed during the seepage treatment, followed by the saturation treatment then drainage treatment, indicating that variation in vertical hydraulic gradients could significantly alter k_r values. This study also found that land-use types could also alter k_r and Ʈ_c values. Further research, however, is necessary to better quantify the effects of subsurface hydrological conditions and land-use types on k_r under different soil zonalities in China's Hengduan Mountains. © 2018 John Wiley & Sons, Ltd.     

黏土水泥浆材特性的试验研究

黏土水泥浆材是采空区处治的优选注浆材料，但目前关于优化浆材配比的研究较少。针对毕威高速公路水塘隧道出口段采空区处治工程，提出采用黏土水泥浆液进行注浆处理，并进行室内试验研究，得到了不同配比浆液的凝结时间、结石率、结石密度、结石体抗压强度、渗透系数及冲蚀率等性能指标。试验结果表明，固相比较低的浆液凝结时间较短，抗压强度较高，渗透系数较大；随原浆比重增加，浆液的凝结时间缩短，强度提高且渗透系数降低；偏铝酸钠可有效缩短浆液的凝结时间；最终确定了黏土水泥浆材的配比和原浆比重。本次研究可为高速公路下伏采空区的注浆治理提供设计依据。     

全球主要河流流域碳酸盐岩风化碳汇评估

碳酸盐岩风化吸收的大气CO₂主要以HCO₃ ^-形式连续地经由河流从大陆输送到海洋,成为陆地生态系统的重要碳汇。目前主要河流流域的碳酸盐岩风化碳汇估算存在不确定性,分布格局尚不清晰。基于GEMS-GLORI全球河流数据库提供的全球10万km ²以上主要河流流域多年平均监测数据,利用水化学径流法估算出全球主要河流流域碳酸盐岩对CO₂的吸收速率为0.43±0.15 Pg CO₂ yr ^-1,平均CO₂吸收通量为7.93±2.8 t km ^-2 yr ^-1。CO₂吸收通量在不同气候带下差异显著,热带和暖温带CO₂年吸收速率占全球主要河流流域年吸收速率的62.95%。冷温带CO₂年吸收速率占全球主要河流流域的33.05%,仅次于热带地区。本文划分出全球CO₂吸收通量的9个关键带,关键带的交汇处CO₂吸收通量较高。喀斯特出露流域碳酸盐岩对CO₂吸收通量的均值为8.50 t km ^-2 yr ^-1,约为非喀斯特流域的3倍。全球喀斯特出露流域碳酸盐岩风化碳汇在全球碳循环、水循环及碳收支平衡估算研究方面占据重要地位。     

基于U形卷积神经网络的震相识别与到时拾取方法研究

精确获取震相到时是地震定位和地震走时成像等研究的重要基础.近年来，随着地震台站的不断加密，地震台网监测到的地震数量成倍增长，发展快速、准确、适用性强的震相到时自动拾取算法是地震行业的迫切需求.本文在前人工作基础上，发展了Pg、Sg震相自动识别与到时拾取的U网络算法（Unet_cea），使用汶川余震和首都圈地震台网记录的89344个不同震级、不同信噪比的样本进行训练和测试.研究表明，U网络能够较好地识别Pg、Sg震相类型和拾取到时，Pg、Sg震相的正确识别率分别为81%和79.1%，与人工标注到时的均方根误差分别为0.41 s和0.54 s.U网络在命中率、均方根误差等性能指标上均明显优于STA/LTA和峰度分析自动拾取方法.研究获得的最优模型可以为区域地震台网的自动处理提供辅助.